Presented by
Stamp Yacht Sales
2005 Custom 32' (9.75 m) Stardust 32 Express
Johns Island, South Carolina, United States
Legal Limit
2005 CUSTOM STARDUST 32 EXPRESS SPORTFISH
Flag of Registry: United States
- Sport Fishing
- Power
- Used
- Diesel
- Cold Molded Hull
Description
LEGAL LIMIT is a great example of a small, super-efficient but full featured custom sportfisherman. Run 50 miles offshore, troll all day, run home, and only burn 100 gallons. Legal Limit will make that happen! Why buy an open boat or center console that burns tons of fuel and offers no comforts when you can have a sportfisher with a tower, air conditioning, bunks for a nap and full fishing features?! Come see her in beautiful and convenient Charleston, South Carolina.
Stamp Yacht Sales is pleased to assist you in the purchase of this vessel. This boat is centrally listed by United Yacht Sales. It is offered as a convenience by this broker/dealer to its clients and is not intended to convey direct representation of a particular vessel
Specifications
LOA: 32' (9.75 Meters)
Type: Power- Used
Year: 2005
Beam: 10' 8''
Draft Max: 2' 11''
Cabins: 1
Heads: 1
Maximum Speed: 28 Knots
Cruise Speed: 21 Knots
Fuel Type: Diesel
Hull Material: Cold Molded
Hull Shape: Planing
Fuel Tank: 260 Gallons (984.21 Liters)
Fresh Water: 15 Gallons (56.78 Liters)
Holding Tank: 10 Gallons (37.85 Liters)
Gross Tonnage: 15
Photos click to view all
Engines
Engine 1
- Engine Make: Cummins
- Engine Model: 6CTA 8.3L
- Engine Type: Inboard
- Drive Type: Direct
- Power HP: 450.00
- Power KW: 335.56
- Fuel Type: Diesel
- Hours: 1652.00
- Engine Location: Middle
Full Details
Cold Molded Hull Construction Method
Cold Molded Boats
Cold molding is a building technique that laminates multiple layers of wood veneers, or sometimes plywood, in various directions over a jig, creating a light, strong hull. An exterior layer of fiberglass is added for abrasion resistance. The layers are bonded with epoxy, and sometimes, carbon fiber or Kevlar is incorporated for strength and weight savings. The process is called cold molding because the epoxy cures at room temperature, rather than requiring heat.
Features
- Teak covering boards
- Minimal draft of 2’11” due to prop tunnel
- Propped conservatively for efficiency
- 2,200 RPM = 21.5 knots
- 2,300 RPM = 23 knots
- 2,700 RPM = 28 knots
- Large cockpit
- Rocket launcher in cockpit
- Cockpit overhead lighting
- Tuna door
- Hard top with full tower
- Outriggers
- Center rigger
- Teaser reel
- Electric reel outlets
- Tackle storage
- In deck fish boxes
- Forward bench seating
- Over/under bunks
- Vizio TV
- Bow thruster – Side Power SE80
- Jabsco electric head with holding tank
- Dometic 7k HVAC system – will run off the inverter
- Danforth anchor with 25’ of ¼” chain and rode
- Recent bottom paint (August 2024)
Electronics
- Simrad Multi-Function Displays
- Garmin autopilot
- Standard Horizon VHF radio
- Fusion marine stereo
Engine and Mechanical
- Cummins 6CTA 8.3L 450hp with 1,652 hours
- Upgraded 55A alternator
- ZF marine transmission
- Racor filtration
- Fireboy automatic fire suppression
- Dripless shaft seal
- 2-inch stainless-steel shaft
- 4-blade Nibral 28” propeller
- Hydraulic steering
- Hydraulic trim tabs
- Xantrex 40A charger/inverter
- 30A shorepower
- Rule Mate 2000 gph bilge pumps – 4x
- 2x Duracell Group 31 banks – 2020
- 1x Napa Group 4D starting bank - 2020
Mechanical Disclaimer
Engine and generator hours are as of the date of the original listing and are a representation of what the listing broker is told by the owner and/or actual reading of the engine hour meters. The broker cannot guarantee the true hours. It is the responsibility of the purchaser and/or his agent to verify engine hours, warranties implied or otherwise and major overhauls as well as all other representations noted on the listing brochure.
Disclaimer
The company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change or withdrawal without notice.
Listing MLS by Yachtr.com
Contact Us
Stamp Yacht Sales
23375 Janice Avenue
Suite 14
Port Charlotte FL 33980
Email: bill@stampyachtsales.com
Bill's love of boats and boating is a passion that he will put to good use for YOU – helping you find you the best deal for the best boat that fits your needs for now and in the years to come.